Using Saved Pages ( --saved-pages=... )

Table of contents

Saved pages can be printed in any order, any number of times allowing for copy collation, manual 'duplex' printing or selecting a subset of pages.


Many raster printing devices and raster image format devices can use the command list (clist) to save the rendering information into files or memory based structures. Usually the clist data is rendered as soon as the page is complete, but it is` possible to defer rendering, then output (print) after the entire file has been converted to clist files.

Since each page is saved separately, the pages can be rendered from the clist files in any order, any number of times.

The saved pages are accumulated in clist form as files or in memory. The default clist storage is specified by the BAND_LIST_STORAGE= macro in the make file, but if BAND_LIST_STORAGE=file, the clist can be forced to be in memory using the -sBandListStorage=memory option.

Saved Pages control keywords.

Deferring printing is controlled using the --saved-page=... option.

The string following the --saved-page= consists of keywords, separated by white-space, commas, or other non-alphanumeric characters such as ':', '=', ';'. If more than one keyword is given, the string should be enclosed in double-quotes (").

The '-' (dash), and the '*' asterisk), are used in page range selections, and cannot be keyword separators.

Keywords are case independent, thus "begin", "BEGIN", and "Begin" are all equivalent.

begin
Begins accumulating pages to a list. The clist data for each page is saved in files or memory as discussed above, but no rendering is performed.

If the device was set for rendering into memory, is will be switched to accumulating the page as clist files, thus -dMaxBitmap and -dBandingNever will be ignored, as if -dBandingAlways was specified.

flush
Delete all clist files for all pages on the list, and reset the list to empty, but remain in saved-pages mode. Subsequent pages will be added to the list.
end
Flush any list, deleting all clist files for any accumulated pages and stop accumulating pages, returning to rendering/output as soon as the page is complete.

The device may render subsequent pages in memory (page buffer) as determined by -dMaxBitmap and -dBandingNever.

copies copy_count
Set the copy count for the print action. The requested number of copies will be generated for all subsequent print actions, thus producing collated copies, rather than multiple copies of each page as in normal (non-deferred) rendering and output.

A --saved-pages="copies #" option will be applied to all print actions until a new copies # is encountered that sets the copy count to a different value. Since the copies can follow the print command, it is recommended that only a single copies be in a each --saved-pages=... string.

Note, that unless -d.IgnoreNumCopies=true is specified prior to starting saved-pages mode, the copy count for each page will be saved with each page, and the job will contain the specified number of copies of each page, as well as producing the number of collated copies of the job set by the copies in a --saved-pages=... string.

print print keywords
Print from the list of saved pages. The print keywords follwing the print action keyword determine what is printed, and in what order. The keywords are described in the next section.

Printing Saved Pages

The string following the print action keyword determines which pages from the list are printed, in what order. Any sequence of keywords, page numbers or page ranges can follow the print keyword. The first control keyword (other than copies) ends the list of printing keywords.

As with control keywords, print keywords can be any mixture of upper or lower case, and print keyword, page numbers and page ranges can be seperated by any non-alphanumeric character other than '-' or '*'.

The following are all equivalent:

1 3 5 - *
1, 3, 5-*
1,3,5-*
copies copy_count
As mentioned above, the copies keyword and count can follow the print keyword. See the description of the copies keyword in the previous section.

The copy count will be applied to the entire sequence of print keywords, so it can appear anywhere in the sequence of page number, page ranges or print keywords.

normal
Print all of the pages, from the first until the last page in the list. This keyword is used to print collated copies in the usual page order. This is the same as the page range: "1 - *"
reverse
Print all of the pages, from the last backwards to the first page in the list. This keyword is used to print collated copies in the reverse page order. This is the same as the page range: "* - 1"
odd
Print all odd number pages, from 1 to the last odd numbered page. This keyword, combined with the even keyword and user interaction to place pages that were printed into the input tray, can be used for manual duplexing.
even
Print all even number pages, from 2 to the last even numbered page, then if the list has an odd number of pages print a blank 'pad' page to be the back of the last odd page. This keyword, combined with the odd keyword and user interaction to place pages that were printed into the input tray, can be used for manual duplexing.
even0pad
Print all even number pages, from 2 to the last even numbered page, without any blank 'pad' page as with the even keyword.
page_number
A number not followed by '-' specifies a single page from the list to be printed. The '*' character represents the last page in the list, interpreted as a number, either as a single page_number or as the start_page or end_page in a page range.
start_page - end_page
A range of pages is two page_numbers or * separated by a '-', optionally surrounded by non-alphanumeric characters other than '-' which is a special character in page range specifications. The pages from the start_page to the end_page are printed.

If the start_page is after the end_page, then the order of the pages is reversed, from the start_page back to the end_page.

Examples.

The following examples each print 2 collated copies from the first page to the last page:
--saved-pages="print: normal, copies=2"
--saved-pages="print copies=2, normal"
--saved-pages="copies 2 print normal"
--saved-pages="print 1-* 1-*"
--saved-pages="print normal normal"
Print the last page, followed by all pages in reverse order, then the first page (print reverse with two copies of the last and first page):
--saved-pages="print * reverse 1"
-or-
--saved-pages="print * * - 1 1"
Using the command line arguments with a PostScript or PDF input file to print the odd pages, prompt the operator to reload the printer with the pages that were printed, then print the even pages:
gs -sDEVICE=pgmraw -o /dev/lp0 --saved-pages="begin" examples/annots.pdf \
--saved-pages="print odd" \
-c "(Move printed pages to the input tray, then press enter.) = flush .confirmread)" \
--saved-pages="print even"
Print two collated copies of the first file, followed by 5 copies of the second file:
gs -sDEVICE=pgmraw -o /dev/lp0 --saved-pages="begin" examples/annots.pdf \
--saved-pages="copies=2 print normal flush" \
examples/colorcir.ps \
--saved-pages="copies=5 print normal"

Copyright © 2013 Artifex Software, Inc. All rights reserved.

This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of the license contained in the file LICENSE in this distribution. For more information about licensing, please visit http://www.artifex.com/licensing/ or contact Artifex Software, Inc., 7 Mt. Lassen Drive - Suite A-134, San Rafael, CA 94903, U.S.A., +1(415)492-9861.

Ghostscript version 9.16, 30 March 2015